|
 |
| |
EXPLAIN |
|
| The steel pipe connector
of cutting sleeve type has the characteristics
of connecting firmly,bearing pressure
highly sealing tightil,repeating
well,installating & maintaining
easily and performing safely &
reliably. |
| FUNCTIONAL
STANDARD |
Nominal Pressure:25MPa、40MPa
Applicable Temperature:≤1500C
Applicable Medium:Oil.Water.Gas
and other corrosive or noncorosive
medium
The Materials for Manufacture:20＃，1Cr18Ni9Ti
0Cr18Ni12Mo2Ti,316L
The Demands for Fitting Pipes:φ4～φ42
Cone Thread:ZG、ZM、NPT .etc |
| |
EXPLAIN |
|
This series of pipe
connectors adapt to the connection
with copper,
uyladn,plastic and other pipes |
| FUNCTIONAL STANDARD |
Nominal Pressure:1.0MPa.1.6MPa
The Demands tor Fitting Pipes:
Copper pipcr,nylon pipes:φ6～φ16,
Plastic pipes:φ6 ×1φ8×1
Applicable temperature:≤1500C
Applicable Medium:non corrosive
gas and so on
The Materials for Manufacture:H62
ICr18Ni9Ti
Applicable Range:copper pipes,nylon
pipes, plastic pipes |
| |
|
|
| EXPLAIN |
| The flared
fitting is a connector in one of
the pipe line systems in which oil,water
gas and all kinds of corrosive materials
sre used as the medium |
| FUNCTIONAL STANDARD |
The standard
for Manufacture:GB5625～5623～83
Applicable Temperature:≤4500C
Applicable Medium:OiI,Water.Gas
etc.
The Materials for Manuacture:20#,1Cr18Ni9Ti0Cr
18Ni12Mo2Ti,316L
The Demands for Fitting pipes:φ4～φ34stainles
stell pipes res copper pipes |
| |
| |
|
|
| EXPLAIN |
The products of this
system have many classificaions
and complctc
specifications ,orders are welcome. |
| FUNCTIONAL STANDARD |
Applicable Medium:Oil.Water.Gas
and other corrosive or noncorosive
cedium
Applicable Pressure:≤4500C
The Materials for Manufacture:20#,35#,
1Cr18Ni9Ti，0Cr18Ni12Mo2Ti,316L
The Demands for Fitting Pipes: φ4～φ50steel
pipes |
| |
| |
|
|
| EXPLAIN |
There are many varieties
and complete and complete regulations
sotheyarethe necessary connectors,
widelyused in pipeline |
| FUNCTIONAL STANDARD |
Nominal Pressure:1.0-32MPa
Applicable Pressure:-700C～+4500C
The Materials for Manufacture:20＃，H62
1Cr18Ni9Ti,316L 0Cr18Ni12Mo2Ti, |
| |
| |
|
|
| EXPLAIN |
The manufacture test
and check & acceptance for these
vessels are
performedaccording to the technical
terms for the steel welding vessesl
issued by the Ministry of Machinery |
| FUNCTIONAL STANDARD |
Nominal Pressure：PN1.0PN6.4
PN16
Nominal Diameter：DN50 DN80 DN100
The Materials Manufacture： 20#,1Cr18NI9tI
0Cr18Ni12Mo2Ti. |
| |
| |
|
|
| EXPLAIN |
Its out put is differential
pressure signal.It is able to consist
of flos measurement system combined
with diferential pressure gouges.
The structure is simple installation
and maintaince are convenient,permanebt
pressure lose is small |
| |
| |
|
|
| EXPLAIN |
| This series of productd
are one of the auxiliary units of
gassupply unit group gouges,They
are used to cut off the passa geway
of the pneumatic pipes |
| FUNCTIONAL STANDARD |
·Nominal Pressure:
PN1.0 2.5MPa
·Applicable Medium:Gas and other
corrosive or noncorosive medium
·Applicable temperature:Normal temperature≤200℃
·The Materials for Manufacture:
H62,1Cr18Ni9Ti,316L 0Cr18Ni12Mo2Ti |
| |
YZ9系列测量管截止阀
STOP VALVE FOR MEASURE PIPE LINE
EXPLAIN：
The stop valve for measuring pipe
line was designed by ourselve basedon
taking the structures & froms
England,the U.S.A,Japan,Singapore
and other countries,It is a valve
of the new generation which is most
univer sally used at present.
FUNCTIONAL STANDARD
Nominal pressure:PN2.5PN4PN6.4
PN16PN32MPA Nominal Diameter:DN5~DN25
Applicable Medium:Oil,Water, gas
and other corrosive or noncorrosive
medium
Applicable temperature:-20℃~440℃-70℃
~240℃≤540℃≤570℃
The materials for Manufacture:20#,
1Cr18Ni9Ti,0Cr18Ni12Mo2Ti 12CrMov,316L |
|
|
|
All rights reserve BY ：WENZHOUHUATE METERVALVE CO.,LTD | INTO ADMIN |
|
TEL：86-0577-85981888 85988999 Cellular
phone ：13806551587 13353307161
FAX：86-0577-85981999 |
| FACTORY ADDRESS： China's Zhejiang Province Longwan District of Wenzhou City in the Park Village |
| | |
